The WORK EMOTION M8R in 20 inch, built to order in Japan. A one-piece WORK wheel with fixed insets: choose the width, the colour and the inset here. On this model the inset you pick also settles the taper shape of the face, the P.C.D.s the wheel can be drilled for and the centre-cap clearance, so everything you need to check fitment is in the picker above and in the table below.
MIDDLE and DEEP are WORK's taper shapes for this wheel — how deeply the face is dished. Because this is a one-piece wheel the taper is not a separate choice: each width offers its own fixed insets, and each inset comes in one taper shape. Pick the width first, then the inset. The taper, the available P.C.D.s and the centre-cap clearance all follow from the inset. Every inset at one width is the same price.
Width, inset, taper, clearance and P.C.D. table
WORK photographs the Middle taper in Glanz Black; and the Deep taper in Glanz Silver and Glanz Black at this exact diameter and rim type. Every photograph on this page is WORK's own, of 20 inch NORMAL — none is borrowed from another diameter, another rim type or another model. WORK publishes no photograph of the Middle taper in Glanz Silver anywhere on this model, at any size, so this page carries none for it — the finish is sold, but WORK has never photographed it.
What this page covers
| Model |
WORK EMOTION M8R |
| Construction |
1-piece |
| Diameter |
20 inch |
| Rim type |
NORMAL
WORK prints this table's heading as 1PIECE/NORMAL.
|
| Colours |
Glanz Silver (GZS), Glanz Black (GZK) |
| Taper shapes |
MIDDLE, DEEP |
| Widths |
20×8.5J to 20×9.5J (2 widths) |
| Insets |
2 inset options across the 2 widths, every one of them +38. |
| Standard P.C.D. |
5H-114.3(73.3)
Every inset on this page is 5H-114.3(73.3). These are included in the price shown.
|
| Special P.C.D. |
Not offered at this diameter. WORK prints no 特殊P.C.D. column and no up-charge on the table this 20-inch size belongs to. Other diameters of this model are printed on a different table and some of them do offer it — that does not carry over to this page. |
| Hub height clearance |
F 33–41 mm with the FLAT TYPE cap, H 41–49 mm with the HIGH TYPE cap, depending on the inset — per-inset figures in the table below. |
| TPMS |
WORK prints no size exclusion for TPMS on this model's spread — it gives only its TPMS reference (TPMS対応の詳細▶P.185). Ask us and we will confirm the sensor for your exact size with WORK before you order. |
| Load rating |
WORK prints no JWL rating on this model's spread. |
| Air valve |
S27A2B (black) |
| Centre cap |
Included — one per wheel (see below) |
| Supplied with each wheel |
One centre cap (FLAT TYPE WORK), one air valve (S27A2B, black) and one sticker. |
| Wheel weight, WORK's figure |
20×8.5J: from 11.0 kg
20×9.5J: from 11.2 kg
WORK's own bare wheel weight, printed as a "from" figure. Reference only — it is not the shipping weight.
|
| WORK catalogue code |
EMT-M8R |
What you choose on this page
-
width, colour and inset — all three in the variant picker above. Each inset in the picker names its taper shape, the P.C.D.s it can be drilled for and its FLAT TYPE / HIGH TYPE centre-cap clearance.
-
Nothing to specify in the order notes. These are WORK's fixed insets; there is no inset-to-order range on a one-piece wheel, so an inset between two listed figures cannot be built.
-
Quantity — the price shown is for one wheel.
Widths, insets, tapers, clearances and P.C.D.s — 20 inch
Centre cap — one is included
WORK supplies these wheels with one centre cap (FLAT TYPE WORK), plus one air valve (S27A2B, black) and one sticker. The cap you see below is the alternative WORK offers in its place:
- WORK prints that cap as an up-charge ("up"): it is what it costs to have it instead of the cap that comes with the wheel, not the price of a second cap.
- The clearance figures in the table above are WORK's reference values from the mounting face: F to the FLAT TYPE cap, H to the HIGH TYPE cap. On some hub shapes the cap can still touch even below the figure shown.
- WORK notes that on some vehicles the centre cap cannot be fitted at all.
- Ask us and we will add the items you want to the order.
Notes
- Price is per wheel. Built to order by WORK in Japan; allow for production time.
- Each wheel comes with one centre cap (FLAT TYPE WORK), one air valve (S27A2B, black) and one sticker.
- This is a one-piece wheel. The insets in the table are the fixed insets WORK builds; unlike WORK's two-piece models there is no inset-to-order range and no rim depth to choose — where WORK prints a rim depth it is fixed for that width.
-
Special P.C.D. is not offered at this diameter. WORK prints no 特殊P.C.D. column and no up-charge on the table this size belongs to. It does print one on the table that carries this model's 19 inch, 18 inch and 17 inch sizes, but that is a different table and does not carry over here.
-
20×8.5J: because of the disc design the disc stands 5 mm proud of the rim flange.
-
20×9.5J: because of the disc design the disc stands 3 mm proud of the rim flange.
-
Hub height clearance. The F figure (FLAT TYPE cap) and the H figure (HIGH TYPE cap) are WORK's reference values from the mounting face. Even below the figure shown, some vehicle hub shapes can still touch the cap.
- WORK notes that the taper shapes can look slightly different in colour to one another, because the face geometry differs.
-
TPMS. WORK prints no size exclusion for TPMS on this model's spread — it gives only its TPMS reference (TPMS対応の詳細▶P.185). Ask us and we will confirm the sensor for your exact size with WORK before you order.
-
WORK prints no JWL load rating on this model's spread, so this page states none.
- WORK's printed WEIGHT (Kg) figures quoted above are the bare wheel, as a "from" figure. They are reference values, not the shipping weight of the packed wheel.
- WORK notes that some specifications take longer to produce, and that a build may not be possible under certain production conditions.
- All yen figures quoted on this page are WORK's own tax-included Japanese list prices.
