Steering & Knuckles, KAZAMA

KAZAMA Super Extended Lower Arm (25mm / 35mm) – Toyota Mark II / Chaser / Cresta JZX90 JZX100 / JZX110 / Altezza SXE10 / Crown JZS17

Extended front lower arms cast from dedicated dies rather than cut-and-welded factory arms. Made at...

KAZAMA Tie Rod End (135mm / 155mm) – Nissan Silvia S14 / Skyline HCR32 ECR33 ER34 / Laurel C34 C35

Tie rod ends for Silvia / Skyline and similar Nissans fitted with extended lower arms...

KAZAMA Super Reinforced Tie Rod – Nissan Silvia S14 / Skyline HCR32 BNR32 ECR33 ER33 ER34 ENR34

The tie rod transmits steering input to the tyres. Kazama's high-strength steel tie rod is...

KAZAMA Super Extended Lower Arm (STD / 20mm / 30mm) – Toyota 86 / Subaru BRZ

Reinforced extended lower arms built from scratch with press-forming dies, the same method as the...

KAZAMA Steering Rack Rigid Collar (with Special Tool) – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6 / ZD8

Rigid collars that replace the rubber-bushed mounting of the steering rack with a solid mount....

KAZAMA Tie Rod End for Extended Lower Arm (TYPE-1 / TYPE-2) – Toyota Mark II / Chaser / Cresta JZX90 JZX100

Tie rod ends for JZX90 / JZX100 cars running Kazama's 25 mm or 35 mm...

KAZAMA Super Extended Lower Arm 45mm (Competition Use) – Toyota Mark II / Chaser / Cresta JZX90 JZX100 / JZX110 / Altezza SXE10 / Crown JZS17

The 45 mm extended lower arm added at customers' request alongside the 25 mm and...

KAZAMA Super Reinforced Tie Rod – Toyota Mark II / Chaser / Cresta JZX90 JZX100

High-hardness reinforced tie rods that resist bending and breaking. Spinning at full opposite lock puts...

KAZAMA SPL Knuckle Kit Generation II – Lexus IS / GS / Toyota Mark X / Crown GRS180 GRS200 GSE20 GWS204

Kazama's SPL knuckle kit for the Lexus IS / GS and Toyota Crown / Mark...

KAZAMA Extended Tie Rod End 175mm – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6

Extended tie rod ends cast from Kazama's own dies, made so the tie rod length...

KAZAMA Short Knuckle – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6

Cast short knuckles developed by Kazama together with D1GP driver Fujino of Wisteria and DG-5....

KAZAMA Reinforced Tie Rod (with Angle Washers) – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6 / ZD8

Tie rods with factory dimensions made from high-hardness steel, supplied with removable steering-angle washers so...

KAZAMA Replacement Stabilizer Links for Angle Stabilizer (S14 / S15 OE-Equivalent)

Replacement stabilizer links for the KAZAMA Angle Stabilizer. Kazama states they are also equivalent to...

KAZAMA Angle Stabilizer (with Stabilizer Links) – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6 / ZD8

Front stabilizer kit that mounts the bar to the lower arm. On the 86 /...

KAZAMA Super Lower Arm (STD / 25mm / 35mm) – Nissan Silvia S13 S14 S15 / 180SX / Skyline R32 R33 R34 / Cefiro A31 / Laurel C33 C34 C35

Lower control arms press-formed from Kazama's own dies instead of cut-and-welded factory arms, so there...

KAZAMA SPL Knuckle Kit Ver.2 – Toyota Mark II / Chaser JZX90 JZX100 JZX110 / Altezza SXE10 / Crown JZS15 JZS17

Kazama's cast short-knuckle kit, refined through repeated revisions to a large-diameter ball joint specification and...