RAYS VOLK RACING TE37 SAGA S-plus MM 18-20 inch 5x112

SKU: 06448854220MM

RAYS VOLK RACING TE37 SAGA S-plus MM 18-20 inch 5x112

$632.93 $823.11 Save $190.18

Shipping calculated at checkout

Size: 18×8.5J +42 (5×112)

TE37 — Saga S-Plus (MM)

18–20 inch (5×112)

The TE37 Saga S-Plus is the modern evolution of RAYS’ legendary TE37, retaining the iconic 6-spoke design while adding strengthening and heat-treatment processes to meet higher performance demands.

  • Finish: Diamond Dark Gunmetal (MM)
  • Construction: 1-piece forged (Made in Japan)
  • Note: Price is for one wheel. For a full set, select quantity 4.

Finish: Diamond Dark Gunmetal (MM)

Available Sizes

Jump to size: 18 inch | 19 inch | 20 inch

18-inch Sizes (MM / 5×112)

Select your Size from the variant options above. The reference table below shows official RAYS specifications.

Size Face Inset PCD Hub Bore (φ) Color RAYS Code
18×8.5J F2 +42 5×112 66.6 MM 06448854220MM

Back to top ↑

19-inch Sizes (MM / 5×112)

Select your Size from the variant options above. The reference table below shows official RAYS specifications.

Size Face Inset PCD Hub Bore (φ) Color RAYS Code
19×8.5J F1 +45 5×112 66.6 MM 06449854520MM
19×8.5J F2 +38 5×112 66.6 MM 06449853820MM
19×8.5J F2 +22 5×112 66.6 MM 06449852220MM
19×9.5J F2 +38 5×112 66.6 MM 06449953820MM
19×9.5J F3 +25 5×112 66.6 MM 06449952520MM
19×9.5J F3 +15 5×112 66.6 MM 06449951520MM
19×10.5J F4 +33 5×112 66.6 MM 06449053320MM

Back to top ↑

20-inch Sizes (MM / 5×112)

Select your Size from the variant options above. The reference table below shows official RAYS specifications.

Size Face Inset PCD Hub Bore (φ) Color RAYS Code
20×8.5J F1 +36 5×112 66.6 MM 06440853620MM
20×8.5J F2 +25 5×112 66.6 MM 06440852520MM
20×9J F2 +27 5×112 66.6 MM 06440902720MM
20×9J F3 +20 5×112 66.6 MM 06440902020MM
20×9.5J F3 +25 5×112 66.6 MM 06440952520MM
20×10.5J F4 +32 5×112 66.6 MM 06440053220MM
20×10.5J F5 +15 5×112 66.6 MM 06440051520MM

Back to top ↑

Important Notes

  • All wheels ship from Japan (international shipping available).
  • Valve stems included. Center caps sold separately.
  • Built-to-order: Typical lead time is 2–5 months depending on availability.
  • Availability must be confirmed before ordering. Some sizes may be available from RAYS stock, but most wheels are made to order.
  • Fitment responsibility: Size and inset must be confirmed on the customer’s side. We can help confirm brake clearance and vehicle fitment, but final verification is required on the customer’s side.

Need a different offset, size, or PCD? Contact us and we’ll help with a special order.

Reference: This page is not the full RAYS lineup. For full catalog details, please check the official RAYS site. RAYS

Fitment. Please choose your size and offset at your own discretion. Wheel regulations differ by country, and how far a wheel sits outside the fender depends on ride height and personal preference. We are glad to advise — ask us before you order — but the final choice of size and offset rests with the customer. Any vehicle examples shown are reference sizes only.

Available Now!