KAZAMA

KAZAMA SPICER U-Bolt Kit (3-94-18X)

SPICER Drivetrain Products U-bolt kit (part 3-94-18X) as used by Kazama on its own competition...

KAZAMA Steering Rack Rigid Collar (with Special Tool) – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6 / ZD8

Rigid collars that replace the rubber-bushed mounting of the steering rack with a solid mount....

KAZAMA promode-SS Wide Body Aero – Nissan Silvia S15

The most-fitted aero in D1GP and Formula Drift Japan (Kazama), now evolved further: promode-SS for...

KAZAMA Promode Aero – Nissan Laurel C35 Club S

Sporty Promode design for the C35 Laurel Club S that suits both street and circuit....

KAZAMA promode Aero Type-2 (FRP) – Mazda RX-7 FD3S

Kazama's signature promode series, starting with the FD3S — the first promode blister-fender aero and...

KAZAMA promode Aero Type-1 (FRP) – Mazda RX-7 FD3S

Kazama's signature promode series, starting with the FD3S — the first promode blister-fender aero and...

KAZAMA SPL Engine Mount – Toyota Mark II / Chaser / Cresta JZX90 (Late) / JZX100

Bolt-on SPL engine mount with Kazama's hyper rubber already pressed in. It limits engine tilt...

KAZAMA Tie Rod End for Extended Lower Arm (TYPE-1 / TYPE-2) – Toyota Mark II / Chaser / Cresta JZX90 JZX100

Tie rod ends for JZX90 / JZX100 cars running Kazama's 25 mm or 35 mm...

KAZAMA TRACK EYE II (OBD II Live Monitor)

Compact multi-monitor that plugs into the vehicle's OBD II connector and shows live vehicle data...

KAZAMA Hydraulic Handbrake Lever Supporter – Nissan Fairlady Z Z33 (6MT)

Mounting support for fitting a hydraulic handbrake lever to the Z33 using the factory service...

KAZAMA Silkscreen Sticker (2-Pack)

Kazama's classic silkscreen logo sticker, sold as a set of two. Features Classic Kazama silkscreen...

KAZAMA Samsonas Transmission / 1JZ Spline Bearing Guide Retainer – Toyota 2JZ-GTE

Release-bearing guide retainer ("tengu nose") needed when fitting a Samsonas transmission and a 1JZ clutch...

KAZAMA Super Extended Lower Arm 45mm (Competition Use) – Toyota Mark II / Chaser / Cresta JZX90 JZX100 / JZX110 / Altezza SXE10 / Crown JZS17

The 45 mm extended lower arm added at customers' request alongside the 25 mm and...

KAZAMA Bearing Guide Retainer "Tengu no Hana" for G-FORCE Transmission / Getrag Spline – Toyota 2JZ-GTE

Release-bearing guide retainer ("Tengu no Hana") for a 2JZ-GTE running a G-FORCE transmission with a...

KAZAMA Super Reinforced Tie Rod – Toyota Mark II / Chaser / Cresta JZX90 JZX100

High-hardness reinforced tie rods that resist bending and breaking. Spinning at full opposite lock puts...

KAZAMA SPL Knuckle Kit Generation II – Lexus IS / GS / Toyota Mark X / Crown GRS180 GRS200 GSE20 GWS204

Kazama's SPL knuckle kit for the Lexus IS / GS and Toyota Crown / Mark...

KAZAMA anker Rear 2-Way Caliper Set (No Rotors) – Nissan Fairlady Z Z33

Rear 4-pot caliper set with a 2-way layout: the factory foot brake keeps working as...

KAZAMA Extended Tie Rod End 175mm – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6

Extended tie rod ends cast from Kazama's own dies, made so the tie rod length...

KAZAMA Short Knuckle – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6

Cast short knuckles developed by Kazama together with D1GP driver Fujino of Wisteria and DG-5....

KAZAMA Reinforced Tie Rod (with Angle Washers) – Toyota 86 ZN6 / GR86 ZN8 / Subaru BRZ ZC6 / ZD8

Tie rods with factory dimensions made from high-hardness steel, supplied with removable steering-angle washers so...

KAZAMA Replacement Stabilizer Links for Angle Stabilizer (S14 / S15 OE-Equivalent)

Replacement stabilizer links for the KAZAMA Angle Stabilizer. Kazama states they are also equivalent to...

KAZAMA Samsonas Transmission / 2JZ Getrag Spline Bearing Guide Retainer – Toyota 2JZ-GTE

Release-bearing guide retainer ("tengu nose") needed when fitting a Samsonas transmission and a 2JZ clutch...

KAZAMA Hoodie (SLIDING BATTLE)

Kazama hoodie featuring the team's sponsor logos, in a 10.0 oz fabric that is neither...