KAZAMA Rear Hub 114.3 Conversion Adapter for JZX100 Drive Shafts – Toyota 86 ZN6 / GR86 ZN8 – image 1

SKU: 01RS0302

KAZAMA Rear Hub 114.3 Conversion Adapter for JZX100 Drive Shafts – Toyota 86 ZN6 / GR86 ZN8

$455.71

Shipping calculated at checkout

Ordered for you. Ordered from the manufacturer in Japan after your purchase. Usually ships within about 2 weeks.

Import duties and taxes are not included. They are charged by your country's customs or the carrier when the item arrives.

Adapter kit that converts the rear hubs on the ZN6 / ZN8 factory knuckles to 114.3 PCD using Toyota Mark X (GRX130) hubs, with the shorter JZX100 / JZX110 drive shaft. Designed for use with a JZX100, Quick Change or Bulldog differential. Developed and used on Kazama's carbon GR86 demo car.

Features

  • Converts ZN6 / ZN8 rear hubs to 114.3 PCD (Mark X / GRX130 hubs)
  • Uses the shorter JZX100 / JZX110 drive shaft
  • For JZX100, Quick Change or Bulldog differentials
  • Drive-shaft length adjusted with spacers to suit ride height
  • Duralumin A2017

Specifications

Kazama code 01RS0302
Contents Spacer collars ×2 (L/R, one car) · drive-shaft adjustment spacers ×2
Material Duralumin A2017
Required separately Toyota 86 OE hub bolts ×3 · M12-P1.25 bolt, 50 mm under head ×1 · M10-P1.5 bolts, 20 mm under head ×3 (bolt strength 11T / 10.9 / SCM435)

Fitment

Toyota 86 (ZN6) and GR86 (ZN8) with factory rear knuckles.

Notes

Remove the ABS ring from the drive shaft.

The lower protrusion on the knuckle must be ground off.

Drive-shaft length is adjusted with the spacers depending on ride height (spacers may not be needed).

Mark X / GRX130 hubs and drive shafts are not included.

Competition part — developed for and used on Kazama's own competition/demo cars. Sold without instructions or warranty; no claims or returns (Kazama terms). For experienced users and specialist shops only; Kazama does not answer fitment questions.

Available Now!