| Model |
WORK VS KF# (3-piece, made to order in Japan) |
| Diameter |
19 inch |
| Rim type |
STEP RIM (WORK's 3PIECE / REVERSE specification) |
| Colours on this page |
Brilliant Silver Black (BSB), Light Greyish Silver (LGS) |
| P.C.D. (bolt pattern) |
Two standard bolt patterns. STANDARD (A-Disk) and DEEP RIM (O-Disk) are built in 5H-100 (hub bore 60 mm) or 5H-114.3 (hub bore 73.3 mm) — please tell us which your vehicle needs. Both BIG CALIPER disks (L-Disk and R-Disk) are 5H-114.3 (hub bore 73.3 mm) only. |
| Special P.C.D. |
5H-98 to 5H-120.65 — surcharge from ¥11,000 per wheel (approx. US$65); made to order, allow extra lead time |
| Hub height clearance |
A-Disk (STANDARD) 41 mm, O-Disk (DEEP RIM) 35 mm, L-Disk (BIG CALIPER) 53 mm, R-Disk (BIG CALIPER) 61 mm |
| Widths on this page |
19x7.5J to 19x12.5J (11 widths) |
| WORK catalogue code |
VSKFSSR・65〜95Y/KM |
Every combination listed here is available to order on this page — combinations not shown cannot be built in this configuration. The letter in brackets is WORK's rim code. VS KF# offers two BIG CALIPER disks at this size, the L-Disk and the deeper R-Disk.
| Width |
STANDARD (A-Disk) |
DEEP RIM (O-Disk) |
BIG CALIPER (L-Disk) |
BIG CALIPER (R-Disk) |
| 19x7.5J |
+21 (C) |
+27 (C) |
+9 (C) |
+1 (C) |
| 19x8.0J |
+28 (D) · +15 (C) |
+34 (D) · +21 (C) |
+16 (D) · +3 (C) |
+8 (D) · -5 (C) |
| 19x8.5J |
+34 (E) · +21 (D) · +9 (C) |
+40 (E) · +27 (D) · +15 (C) |
+22 (E) · +9 (D) · -3 (C) |
+14 (E) · +1 (D) · -11 (C) |
| 19x9.0J |
+40 (F) · +28 (E) · +15 (D) · +2 (C) |
+46 (F) · +34 (E) · +21 (D) · +8 (C) |
+28 (F) · +16 (E) · +3 (D) · -10 (C) |
+20 (F) · +8 (E) · -5 (D) · -18 (C) |
| 19x9.5J |
+47 (G) · +34 (F) · +21 (E) · +9 (D) · -4 (C) |
+53 (G) · +40 (F) · +27 (E) · +15 (D) · +2 (C) |
+35 (G) · +22 (F) · +9 (E) · -3 (D) · -16 (C) |
+27 (G) · +14 (F) · +1 (E) · -11 (D) · -24 (C) |
| 19x10.0J |
+40 (G) · +28 (F) · +15 (E) · +2 (D) · -10 (C) |
+46 (G) · +34 (F) · +21 (E) · +8 (D) · -4 (C) |
+28 (G) · +16 (F) · +3 (E) · -10 (D) · -22 (C) |
+20 (G) · +8 (F) · -5 (E) · -18 (D) · -30 (C) |
| 19x10.5J |
+34 (G) · +21 (F) · +9 (E) · -4 (D) · -17 (C) |
+40 (G) · +27 (F) · +15 (E) · +2 (D) · -11 (C) |
+22 (G) · +9 (F) · -3 (E) · -16 (D) · -29 (C) |
+14 (G) · +1 (F) · -11 (E) · -24 (D) · -37 (C) |
| 19x11.0J |
+28 (G) · +15 (F) · +2 (E) · -10 (D) |
+34 (G) · +21 (F) · +8 (E) · -4 (D) |
+16 (G) · +3 (F) · -10 (E) · -22 (D) |
+8 (G) · -5 (F) · -18 (E) · -30 (D) |
| 19x11.5J |
+21 (G) · +9 (F) · -4 (E) |
+27 (G) · +15 (F) · +2 (E) |
+9 (G) · -3 (F) · -16 (E) |
+1 (G) · -11 (F) · -24 (E) |
| 19x12.0J |
+15 (G) · +2 (F) |
+21 (G) · +8 (F) |
+3 (G) · -10 (F) |
-5 (G) · -18 (F) |
| 19x12.5J |
+9 (G) |
+15 (G) |
-3 (G) |
-11 (G) |
Price is for one wheel — select the correct quantity for a full set. VS KF# is built to order by WORK in Japan; contact us to confirm the current lead time before ordering. Each wheel includes one centre cap and one air valve (V27C). The buff-anodized rim is standard. Hub height clearance on this page: A-Disk (STANDARD) 41 mm, O-Disk (DEEP RIM) 35 mm, L-Disk (BIG CALIPER) 53 mm, R-Disk (BIG CALIPER) 61 mm. WORK VS KF# 19 inch REVERSE (STEP RIM) clears JWL-P720KG (passenger car standard). Please contact us about the correct nuts and bolts for your vehicle. Special P.C.D. is made to order and needs extra lead time. WORK's special P.C.D. charge starts at ¥11,000 per wheel; the US$65 shown above is an approximate conversion only — the charge is set in Japanese yen by WORK and the exact amount is confirmed on your quotation. TPMS processing is free of charge. Please message us before ordering if you would like fitment advice, or if you need a configuration that is not shown here.
