WORK SCHWERT SG2 21 inch STEP RIM – Black Cut Clear

商品番号: WORK-SWSG2-2P-21-BP-8.5-SR

WORK SCHWERT SG2 21 Inch STEP RIM – All Colours and Widths

$767.00 $927.14 保存 $160.14

配送料はチェックアウト時に計算されます

Width: 21×8.5J
Colour: Black Cut Clear (BP)

The WORK SCHWERT SG2 in 21 inch STEP RIM, built to order in Japan. This is a genuine two-piece WORK wheel: you choose the width and the disc colour here, then tell us the disk type and the exact inset you want from WORK's ranges below, and WORK machines the wheel to that spec.

WORK photographs Glimit Silver, Black Cut Clear at this exact size and rim type.

What this page covers

Model WORK SCHWERT SG2
Construction 2-piece
Diameter 21 inch
Rim type STEP RIM
Disc colours Glimit Silver (GTS), Black Cut Clear (BP)
Widths 21×8.5J to 21×12.5J (9 widths)
Disk types A-Disk (STANDARD), O-Disk (DEEP RIM), R-Disk (BIG CALIPER)
P.C.D. A-Disk: 5H-114.3(73.3), 5H-120(60)
O-Disk: 5H-100(60), 5H-114.3(73.3), 5H-120(60)
R-Disk: 5H-114.3(73.3)
Special P.C.D. 5H-100 to 5H-120.65 — WORK custom order, from ¥11,000 per wheel
Hub height clearance A-Disk 49 mm, O-Disk 37 mm, R-Disk 57 mm
Load rating JWL-P720KG
Air valve V24C
Rim finish Buff anodised (standard)
WORK catalogue code SG2-SR・HNH

What you choose on this page

  • Disc colour and width — in the variant picker above.
  • Disk type and inset — tell us in the order notes, using the ranges below. Any inset inside a range can be built.
  • Quantity — the price shown is for one wheel.

Order inset ranges — 21 inch STEP RIM

WORK builds these wheels to your inset rather than to fixed steps. Pick a disk type, then any inset within that disk's range for your width. The rim depth beneath each range is what that inset produces.

Width A-Disk — STANDARD
hub height clearance 49 mm
5H-114.3(73.3), 5H-120(60) 		O-Disk — DEEP RIM
hub height clearance 37 mm
5H-100(60), 5H-114.3(73.3), 5H-120(60) 		R-Disk — BIG CALIPER
hub height clearance 57 mm
5H-114.3(73.3)
21×8.5J +36 to ±0rim depth 50–86 mm +48 to +12rim depth 50–86 mm +28 to -8rim depth 50–86 mm
21×9.0J +42 to -6rim depth 50–98 mm +54 to +6rim depth 50–98 mm +34 to -14rim depth 50–98 mm
21×9.5J +48 to -12rim depth 50–110 mm +60 to ±0rim depth 50–110 mm +40 to -20rim depth 50–110 mm
21×10.0J +55 to -19rim depth 50–124 mm +67 to -7rim depth 50–124 mm +47 to -27rim depth 50–124 mm
21×10.5J +61 to -25rim depth 50–136 mm +73 to -13rim depth 50–136 mm +53 to -33rim depth 50–136 mm
21×11.0J +67 to -31rim depth 50–148 mm +79 to -19rim depth 50–148 mm +59 to -39rim depth 50–148 mm
21×11.5J +74 to -38rim depth 50–162 mm +85 to -26rim depth 51–162 mm +66 to -46rim depth 50–162 mm
21×12.0J +77 to -44rim depth 53–174 mm +85 to -32rim depth 57–174 mm +69 to -52rim depth 53–174 mm
21×12.5J +71 to -50rim depth 65–186 mm +83 to -38rim depth 65–186 mm +63 to -58rim depth 65–186 mm

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V24C).
  • On some cars WORK’s standard centre cap cannot be fitted and the optional HIGH TYPE cap must be bought separately — it adds 10 mm of hub height clearance. Check the matching guide or ask us before ordering.
  • A buff-anodised rim is the standard finish.
  • Below 70 mm of rim depth the disc sits proud of the rim mating face — and WORK adds that there is no protrusion past the rim flange.
  • Rated JWL-P720KG (Japanese passenger-car standard).
  • Special P.C.D. 5H-100 to 5H-120.65 is available as a WORK custom order, from ¥11,000 per wheel (about US$65) on top of the listed price.
  • If you order a special P.C.D., please ask us about the nuts or bolts you intend to use.
  • WORK has ended production of the SCHWERT SG2. It is still built to order while WORK’s stock of components lasts — ask us to confirm availability before you order.
  • The standard 5H-114.3 P.C.D. takes M14 mounting bolts, with 60° taper seats.
  • TPMS processing is free of charge.

今すぐご利用いただけます!