WORK SCHWERT SG2 Black Cut Clear – 20 inch wheel shown, rim type not stated by WORK; finish reference for 19 inch FULL REVERSE

商品番号: WORK-SWSG2-2P-19-BP-7.5-FR

WORK SCHWERT SG2 19 Inch FULL REVERSE – All Colours and Widths

$572.00 $691.43 保存 $119.43

配送料はチェックアウト時に計算されます

Width: 19×7.5J
Colour: Black Cut Clear (BP)

The WORK SCHWERT SG2 in 19 inch FULL REVERSE, built to order in Japan. This is a genuine two-piece WORK wheel: you choose the width and the disc colour here, then tell us the disk type and the exact inset you want from WORK's ranges below, and WORK machines the wheel to that spec.

The Glimit Silver photo is WORK’s 20 inch wheel, shown here as a finish reference. The Black Cut Clear photo is a 20 inch wheel that WORK does not label with a rim type, so treat it as a finish reference only.

What this page covers

Model WORK SCHWERT SG2
Construction 2-piece
Diameter 19 inch
Rim type FULL REVERSE
Disc colours Glimit Silver (GTS), Black Cut Clear (BP)
Widths 19×7.5J to 19×12.5J (11 widths)
Disk types A-Disk (STANDARD), O-Disk (DEEP RIM)
P.C.D. A-Disk: 5H-114.3(73.3), 5H-120(60)
O-Disk: 5H-100(60), 5H-114.3(73.3), 5H-120(60)
Special P.C.D. 5H-100 to 5H-120.65 — WORK custom order, from ¥11,000 per wheel
Hub height clearance A-Disk 50 mm, O-Disk 35 mm
Load rating JWL-P720KG
Air valve V24C or V39A
Rim finish Buff anodised (standard)
WORK catalogue code SG2・HSH

What you choose on this page

  • Disc colour and width — in the variant picker above.
  • Disk type and inset — tell us in the order notes, using the ranges below. Any inset inside a range can be built.
  • Quantity — the price shown is for one wheel.

Order inset ranges — 19 inch FULL REVERSE

WORK builds these wheels to your inset rather than to fixed steps. Pick a disk type, then any inset within that disk's range for your width. The rim depth beneath each range is what that inset produces.

Width A-Disk — STANDARD
hub height clearance 50 mm
5H-114.3(73.3), 5H-120(60) 		O-Disk — DEEP RIM
hub height clearance 35 mm
5H-100(60), 5H-114.3(73.3), 5H-120(60)
Order inset 1
valve V24C 		Order inset 2
valve V39A 		Order inset 1
valve V24C 		Order inset 2
valve V39A
19×7.5J +32 to +24rim depth 47–55 mm +23 to +11rim depth 56–68 mm +47 to +39rim depth 47–55 mm +38 to +26rim depth 56–68 mm
19×8.0J +38 to +18rim depth 47–67 mm +17 to +5rim depth 68–80 mm +53 to +33rim depth 47–67 mm +32 to +20rim depth 68–80 mm
19×8.5J +45 to +11rim depth 47–81 mm +10 to -2rim depth 82–94 mm +60 to +26rim depth 47–81 mm +25 to +13rim depth 82–94 mm
19×9.0J +51 to +5rim depth 47–93 mm +4 to -8rim depth 94–106 mm +66 to +20rim depth 47–93 mm +19 to +7rim depth 94–106 mm
19×9.5J +57 to -1rim depth 47–105 mm -2 to -14rim depth 106–118 mm +72 to +14rim depth 47–105 mm +13 to +1rim depth 106–118 mm
19×10.0J +64 to -8rim depth 47–119 mm -9 to -21rim depth 120–132 mm +79 to +7rim depth 47–119 mm +6 to -6rim depth 120–132 mm
19×10.5J +70 to -14rim depth 47–131 mm -15 to -27rim depth 132–144 mm +85 to +1rim depth 47–131 mm ±0 to -12rim depth 132–144 mm
19×11.0J +76 to -20rim depth 47–143 mm -21 to -33rim depth 144–156 mm +85 to -5rim depth 53–143 mm -6 to -18rim depth 144–156 mm
19×11.5J +83 to -27rim depth 47–157 mm -28 to -40rim depth 158–170 mm +85 to -12rim depth 60–157 mm -13 to -25rim depth 158–170 mm
19×12.0J +85 to -33rim depth 51–169 mm -34 to -46rim depth 170–182 mm +85 to -18rim depth 66–169 mm -19 to -31rim depth 170–182 mm
19×12.5J +78 to -39rim depth 64–181 mm -40 to -52rim depth 182–194 mm +85 to -24rim depth 72–181 mm -25 to -37rim depth 182–194 mm

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V24C or V39A). オーダーインセット:1はV24C、オーダーインセット:2はV39Aとなります。
  • On some cars WORK’s standard centre cap cannot be fitted and the optional HIGH TYPE cap must be bought separately — it adds 10 mm of hub height clearance. Check the matching guide or ask us before ordering.
  • A buff-anodised rim is the standard finish.
  • Below 50 mm of rim depth the disc sits proud of the rim flange — though WORK notes that even above that depth the disc may still protrude very slightly past the rim flange, within tolerance.
  • Rated JWL-P720KG (Japanese passenger-car standard).
  • Special P.C.D. 5H-100 to 5H-120.65 is available as a WORK custom order, from ¥11,000 per wheel (about US$65) on top of the listed price.
  • If you order a special P.C.D., please ask us about the nuts or bolts you intend to use.
  • WORK has ended production of the SCHWERT SG2. It is still built to order while WORK’s stock of components lasts — ask us to confirm availability before you order.
  • The standard 5H-114.3 P.C.D. takes M14 mounting bolts, with 60° taper seats.
  • TPMS processing is free of charge.

今すぐご利用いただけます!