WORK RIZALTADO MESH2 Light Grayish Silver – 17 inch FULL REVERSE wheel shown, finish reference for 16 inch

商品番号: WORK-RZMESH2-2P-16-LGS-5.5-FR

WORK RIZALTADO MESH2 16 Inch FULL REVERSE – All Colours and Widths

$351.00 $424.29 保存 $73.29

配送料はチェックアウト時に計算されます

Width: 16×5.5J
Colour: Light Grayish Silver (LGS)

The WORK RIZALTADO MESH2 in 16 inch FULL REVERSE, built to order in Japan. A genuine two-piece WORK wheel: choose the width and disc colour here, then tell us the disk type and inset you want from WORK's table below, and WORK builds the wheel to that spec.

RIZALTADO MESH2 — discontinued by WORK. Available while supplies last, on an asking basis. WORK has ended production of this model and now builds it only from the discs and rims still in stock, so not every width, colour or inset can be guaranteed. Please ask us before you order: we check your exact specification with WORK and confirm availability and lead time in writing first.

WORK photographs Mat Black, Brushed at this exact size and rim type. The Light Grayish Silver photo is WORK’s 17 inch wheel, shown here as a finish reference.

What this page covers

Model WORK RIZALTADO MESH2
Construction 2-piece
Diameter 16 inch
Rim type FULL REVERSE
Disc colours Light Grayish Silver (LGS), Mat Black (MBL), Brushed (BRU)
Widths 16×5.5J to 16×9.0J (7 widths)
Disk types A-Disk (STANDARD), O-Disk (DEEP RIM)
P.C.D. A-Disk: 4H-100(60)
O-Disk: 4H-100(60)
Special P.C.D. Not offered on this model
Hub height clearance A-Disk 38 mm, O-Disk 28 mm
Load rating WORK prints no JWL rating for this size and rim type
Air valve V16C
Rim finish Buff anodised (standard)
WORK catalogue code RIX･HRH
This is a four-bolt wheel: 4H-100 only. It fits 4×100 hubs — kei and compact cars — and cannot be built for five-bolt fitments.

What you choose on this page

  • Disc colour and width — in the variant picker above.
  • Disk type and inset — tell us in the order notes, using the table below. Any inset inside the range can be built.
  • Quantity — the price shown is for one wheel.

Insets — 16 inch FULL REVERSE

Width A-Disk — STANDARD
hub height clearance 38 mm · 4H-100(60) 		O-Disk — DEEP RIM
hub height clearance 28 mm · 4H-100(60)
Order inset Order inset
16×5.5J +36 to +26rim depth 27–37 mm +46 to +36rim depth 27–37 mm
16×6.0J +42 to +20rim depth 27–49 mm +52 to +30rim depth 27–49 mm
16×6.5J +48 to +14rim depth 27–61 mm +58 to +24rim depth 27–61 mm
16×7.0J +55 to +7rim depth 27–75 mm +65 to +17rim depth 27–75 mm
16×8.0J +67 to -5rim depth 27–99 mm +77 to +5rim depth 27–99 mm
16×8.5J +74 to -12rim depth 27–113 mm +84 to -2rim depth 27–113 mm
16×9.0J +80 to -18rim depth 27–125 mm +85 to -8rim depth 32–125 mm

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V16C).
  • The Mat Black disc takes a matte black centre cap.
  • A buff-anodised rim is the standard finish.
  • Below 33 mm of rim depth the disc sits proud of the rim flange — though WORK notes that even above that depth the disc may still protrude very slightly past the rim flange, within tolerance.
  • Discontinued by WORK — available while supplies last, on an asking basis. Ask us to confirm availability and lead time for your exact specification before you order.
  • TPMS processing is free of charge.

今すぐご利用いただけます!