WORK MEISTER S1 2PIECE 15 inch NORMAL, White (WHT) — WORK factory photo

商品番号: WORK-MSTS12P-2P-15-WHT-5.5J

WORK MEISTER S1 2PIECE 15 Inch – All Colours and Widths

$325.00 $392.86 保存 $67.86

配送料はチェックアウト時に計算されます

Width: 15×5.5J
Colour: White (WHT)

The WORK MEISTER S1 2PIECE in 15 inch, built to order in Japan. A genuine two-piece WORK wheel: choose the width and the disc colour here, then tell us the disk type and the exact inset you want from WORK's ranges below, and WORK machines the wheel to that spec.

WORK photographs White, Silver, Black and Titanium Gold at this exact diameter and rim type. Every photograph on this page is WORK's own, of 15 inch NORMAL — none is borrowed from another size.

What this page covers

Model WORK MEISTER S1 2PIECE
Construction Two-piece
Diameter 15 inch
Rim type NORMAL
WORK prints this table's heading as 2PIECE/NORMAL.
Disc colours White (WHT), Silver (SIL), Black (BLK), Titanium Gold (HPG)
Buff Finish (PP) is not offered on the two-piece; WORK prints it only on the S1 three-piece tables.
Widths 15×5.5J to 15×10.0J (10 widths)
Disk types A-Disk (STANDARD), O-Disk (DEEP RIM), R-Disk (BIG CALIPER)
P.C.D. A-Disk: 4H-100(60), 4H-114.3(73.3), 5H-100(60), 5H-114.3(73.3)
O-Disk: 4H-100(60)
R-Disk: 4H-100(60), 4H-114.3(73.3), 5H-100(60), 5H-114.3(73.3)
Special P.C.D. A-Disk (STANDARD): 4H-98〜114.3 and 5H-98〜120.65
R-Disk (BIG CALIPER): 4H-98〜114.3 and 5H-98〜120.65
O-Disk (DEEP RIM): not offered — WORK prints ― in that cellWORK prints 同価格 — no up-charge — on the blocks that offer it.
A dimension A-Disk: 27 mm
O-Disk: 15 mm
R-Disk: 37 mmWORK's own A寸法 / センター深さ figure — the disc centre depth measured from the outer edge of the rim.
Hub height clearance WORK prints none. No hub height clearance figure appears anywhere on this spread, so this page states none.
Load rating WORK prints no JWL sentence for the two-piece. The S1 three-piece tables on the same spread do print one at 20, 19 and 18 inch; that is a different product and does not carry over.
Air valve V29A2
Rim finish Buff anodised — WORK's standard rim finish on this model
Centre cap WORK prints no centre-cap line for the two-piece. Its panel lists neither an included cap nor an optional one, so this page claims neither. Ask us if you need one.
Supplied with each wheel one air valve (V29A2), one disc sticker and one rim sticker
Wheel weight, WORK's figure WORK prints no WEIGHT column on this spread, so this page quotes none.
WORK catalogue code MSTER・QNB

What you choose on this page

  • Width and disc colour — in the variant picker above. Those two set the price.
  • Disk type and inset — tell us in the order notes, using the ranges below. Any inset inside a range can be built, and the rim depth moves with it.
  • Quantity — the price shown is for one wheel.

Order inset ranges — 15 inch

Width A-Disk — STANDARD
4H-100(60), 4H-114.3(73.3), 5H-100(60), 5H-114.3(73.3) · A dimension 27 mm
special P.C.D. 4H-98〜114.3 and 5H-98〜120.65, no up-charge 		O-Disk — DEEP RIM
4H-100(60) · A dimension 15 mm
special P.C.D. not offered 		R-Disk — BIG CALIPER
4H-100(60), 4H-114.3(73.3), 5H-100(60), 5H-114.3(73.3) · A dimension 37 mm
special P.C.D. 4H-98〜114.3 and 5H-98〜120.65, no up-charge
Order inset
rim depth in brackets 		Order inset
rim depth in brackets 		Order inset
rim depth in brackets
15×5.5J +31 to +9rim depth 43–65 mm +44 to +22rim depth 43–65 mm +21 to -1rim depth 43–65 mm
15×6.0J +37 to +23rim depth 43–57 mm +50 to +36rim depth 43–57 mm +27 to +13rim depth 43–57 mm
15×6.5J +43 to +17rim depth 43–69 mm +56 to +30rim depth 43–69 mm +33 to +7rim depth 43–69 mm
15×7.0J +49 to +10rim depth 43–82 mm +62 to +23rim depth 43–82 mm +39 to ±0rim depth 43–82 mm
15×7.5J +55 to +4rim depth 43–94 mm +68 to +17rim depth 43–94 mm +45 to -6rim depth 43–94 mm
15×8.0J +61 to -2rim depth 43–106 mm +74 to +11rim depth 43–106 mm +51 to -12rim depth 43–106 mm
15×8.5J +67 to -8rim depth 43–118 mm +80 to +5rim depth 43–118 mm +57 to -18rim depth 43–118 mm
15×9.0J +74 to -15rim depth 43–132 mm +85 to -2rim depth 45–132 mm +64 to -25rim depth 43–132 mm
15×9.5J +80 to -21rim depth 43–144 mm +85 to -8rim depth 51–144 mm +70 to -31rim depth 43–144 mm
15×10.0J +85 to -28rim depth 45–158 mm +85 to -15rim depth 58–158 mm +77 to -38rim depth 43–158 mm
  • Each cell is WORK's order-inset range for that disk, with the rim depth that goes with each end in brackets. Inset and rim depth move together: the shallower the inset, the deeper the rim.
  • A dash means WORK does not build that disk at that width.

Optional and replacement items

WORK's own optional extras and replacement parts for this model, bought separately. WORK prints no centre cap for this model, so none is listed.

Item WORK part no. WORK list price Type
Air valveV29A2 No.180063 ¥1,650 each Replacement
Stickerdisc sticker, blue No.130008 ¥550 each Replacement
Stickerdisc sticker, white No.130009 ¥550 each Replacement
StickerS1 rim sticker No.130010 ¥550 each Replacement
  • All yen figures are WORK's own tax-included Japanese list prices. Ask us and we will add the items you want to the order.

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one air valve (V29A2), one disc sticker and one rim sticker. WORK prints no centre-cap line for this model, so this page claims neither an included cap nor an optional one.
  • A buff-anodised rim is WORK's standard rim finish on this model.
  • Below 47 mm rim depth the disc sits proud of the rim flange. WORK adds that even at or above that depth the disc may still protrude very slightly past the rim flange, within tolerance.
  • WORK prints no JWL sentence for the two-piece. We state none rather than borrowing the S1 three-piece sentence printed on the same spread.
  • Special P.C.D. is offered on A-Disk (STANDARD) and R-Disk (BIG CALIPER) at no up-charge, and WORK prints a dash against O-Disk (DEEP RIM) — it is not offered on that disk, and the neighbouring disks' ranges are not read onto it.
  • WORK asks that you check the nuts or bolts you intend to use with us before ordering a special P.C.D.
  • Semi-order colours. WORK will build this wheel in a colour of its own semi-order range at the same price as the standard colours. Ask us and we will check the colour and the lead time with WORK.
  • WORK's Custom Order Plan covers this model: rim arrangement, semi-order colour and special P.C.D. Ask us for a quotation.
  • TPMS. WORK prints no TPMS panel beside the two-piece at all, so this page claims none. The panel printed on the S1 three-piece masthead reads 20inchのみ対応 and belongs to that product, not this one.
  • WORK notes that some specifications take longer to produce, and that a build may not be possible under certain production conditions.
  • All yen figures quoted on this page are WORK's own tax-included Japanese list prices.

今すぐご利用いただけます!