WORK EQUIP E10 is a premium 3-piece wheel from WORK Wheels, Japan, in forged billet construction, built to order in your exact specification. This product page covers one specific configuration group of the EQUIP E10 range: 24 inch diameter, all 3 standard finishes. All widths and offsets shown below belong to this group only.
Product photos: the Buff Finish (PP) images show the 24-inch wheel. Silky Rich Silver (SRS) and Black Almite (SKB) are shown using WORK's photographs of other sizes in the EQUIP E10 range, so you can see each finish — the specification on this page is 24 inch.
What this page covers
| Model |
WORK EQUIP E10 (3-piece forged billet construction, made to order in Japan) |
| Diameter |
24 inch |
| Rim type |
FULL REVERSE |
| Finishes on this page |
Silky Rich Silver (SRS), Black Almite (SKB), Buff Finish (PP) |
| P.C.D. (bolt pattern) |
Main P.C.D. 5x114.3 (hub bore confirmed with WORK according to the selected P.C.D. and specification) |
| Special P.C.D. |
Available at no extra cost — 5H-112 to 5H-150 and 6H-127 to 6H-139.7. See the Special P.C.D. Information section below |
| Hub height clearance |
A-Disk (STANDARD) 59 mm, O-Disk (DEEP RIM) 51 mm, W-Disk (HYPER DEEP RIM) 46 mm |
| Widths on this page |
24x8.5J to 24x13.5J (11 widths) |
| WORK catalogue code |
EPT-FR・65〜100RS |
If you require a different P.C.D., please refer to the Special P.C.D. Information section below or contact Kurumaya Tokyo before placing your order.
What you choose on this page
-
Finish — select it in the variant picker above. All finishes share the same widths and offsets; the premium finishes carry a factory surcharge included in the price shown.
-
Width — select it in the variant picker above. Width sets the price and the shipping weight. Prices are per wheel.
-
Offset and disk type — choose these in the required dropdown on this page. The list changes with the width you select and shows only the combinations WORK can build in this configuration.
-
Quantity — pricing is per wheel, so select 4 for a full set, or mix widths for a staggered setup by adding each width to your cart separately.
How to order
-
Step 1 — choose your finish and width in the variant picker.
-
Step 2 — choose your offset and disk type in the dropdown.
-
Step 3 — we confirm the exact build and lead time with WORK before the order is placed with the factory.
Available offsets on this page (24 inch)
Every combination listed here is available to order on this page — combinations not shown cannot be built in this configuration. The letter in brackets is WORK's rim code: within each disk type, each offset pairs with a specific rim depth, and the lower the offset, the deeper the outer lip.
| Width |
STANDARD (A-Disk) |
DEEP RIM (O-Disk) |
HYPER DEEP RIM (W-Disk) |
| 24x8.5J |
+31 (E) · +18 (D) · +6 (C) · -7 (B) |
+39 (E) · +26 (D) · +14 (C) · +1 (B) |
+44 (E) · +31 (D) · +19 (C) · +6 (B) |
| 24x9.0J |
+37 (F) · +25 (E) · +12 (D) · -1 (C) · -13 (B) |
+45 (F) · +33 (E) · +20 (D) · +7 (C) · -5 (B) |
+50 (F) · +38 (E) · +25 (D) · +12 (C) · +0 (B) |
| 24x9.5J |
+44 (G) · +31 (F) · +18 (E) · +6 (D) · -7 (C) · -20 (B) |
+52 (G) · +39 (F) · +26 (E) · +14 (D) · +1 (C) · -12 (B) |
+57 (G) · +44 (F) · +31 (E) · +19 (D) · +6 (C) · -7 (B) |
| 24x10.0J |
+50 (H) · +37 (G) · +25 (F) · +12 (E) · -1 (D) · -13 (C) · -26 (B) |
+58 (H) · +45 (G) · +33 (F) · +20 (E) · +7 (D) · -5 (C) · -18 (B) |
+63 (H) · +50 (G) · +38 (F) · +25 (E) · +12 (D) · +0 (C) · -13 (B) |
| 24x10.5J |
+44 (H) · +31 (G) · +18 (F) · +6 (E) · -7 (D) · -20 (C) · -32 (B) |
+52 (H) · +39 (G) · +26 (F) · +14 (E) · +1 (D) · -12 (C) · -24 (B) |
+57 (H) · +44 (G) · +31 (F) · +19 (E) · +6 (D) · -7 (C) · -19 (B) |
| 24x11.0J |
+37 (H) · +25 (G) · +12 (F) · -1 (E) · -13 (D) · -26 (C) |
+45 (H) · +33 (G) · +20 (F) · +7 (E) · -5 (D) · -18 (C) |
+50 (H) · +38 (G) · +25 (F) · +12 (E) · +0 (D) · -13 (C) |
| 24x11.5J |
+31 (H) · +18 (G) · +6 (F) · -7 (E) · -20 (D) |
+39 (H) · +26 (G) · +14 (F) · +1 (E) · -12 (D) |
+44 (H) · +31 (G) · +19 (F) · +6 (E) · -7 (D) |
| 24x12.0J |
+25 (H) · +12 (G) · -1 (F) · -13 (E) |
+33 (H) · +20 (G) · +7 (F) · -5 (E) |
+38 (H) · +25 (G) · +12 (F) · +0 (E) |
| 24x12.5J |
+18 (H) · +6 (G) · -7 (F) |
+26 (H) · +14 (G) · +1 (F) |
+31 (H) · +19 (G) · +6 (F) |
| 24x13.0J |
+12 (H) · -1 (G) |
+20 (H) · +7 (G) |
+25 (H) · +12 (G) |
| 24x13.5J |
+6 (H) |
+14 (H) |
+19 (H) |
Special P.C.D. Information
The main P.C.D. for this page is 5x114.3. WORK does not print a single standard P.C.D. for EQUIP E10 24 inch — instead, a Special P.C.D. within the ranges below is available by custom order at no additional charge (WORK lists Special P.C.D. for 24 inch at the same price). This section includes a 6-hole option, which is specific to the 24 inch specification. Please contact Kurumaya Tokyo before placing your order.
| Main P.C.D. |
5x114.3 |
| STANDARD (A-Disk) |
5H-112 to 5H-150 · 6H-127 to 6H-139.7 |
| DEEP RIM (O-Disk) |
5H-112 to 5H-150 · 6H-127 to 6H-139.7 |
| HYPER DEEP RIM (W-Disk) |
5H-112 to 5H-150 · 6H-127 to 6H-139.7 |
| Special P.C.D. Additional Cost |
No additional charge — WORK lists Special P.C.D. for 24 inch at the same price |
The ranges above are as shown in the current WORK catalogue for EQUIP E10 24 inch and apply to all three disk types on this page. The hub bore for 24 inch is not stated in the WORK catalogue and is confirmed according to the selected P.C.D. and specification. Note from WORK: the 5H-150 fitment for Land Cruiser 200-series / LEXUS LX cannot be used with the factory (OEM) wheel nuts — contact us about compatible nuts. Please ask us about compatible nuts and bolts when ordering a Special P.C.D.
Why is WORK EQUIP E10 listed on more than one product page?
WORK builds the EQUIP E10 in four diameters, each with its own widths, offsets, disk types and specifications, so we list each diameter as its own product page, with every finish available on it. This page is only for 24 inch. EQUIP E10 is also listed in 22, 20, 19 inch. Search "WORK EQUIP E10" in our store to see all listings.
If you are running a staggered front/rear setup across different pages, order from each, or message us for a single combined quotation.
Notes
Price is for one wheel — select the correct quantity for a full set. EQUIP E10 is built to order by WORK in Japan; contact us to confirm the current lead time before ordering. Each wheel includes one centre cap and one air valve (V36C). The buff-anodized rim is standard, and chrome piercing bolts are standard. Hub height clearance on this page: A-Disk (STANDARD) 59 mm, O-Disk (DEEP RIM) 51 mm, W-Disk (HYPER DEEP RIM) 46 mm. WORK EQUIP E10 24 inch FULL REVERSE clears JWL-P860KG (passenger car standard) and JWL-T955KG (truck standard). TPMS processing is free of charge. WORK custom options — rim arrangement, semi-order colours, rim laser tattoo and special P.C.D. as noted above — are available on request. Please message us before ordering if you would like fitment advice, or if you need a configuration that is not shown here.
