WORK EMOTION RS11 15 inch NORMAL, Black (BLK) — WORK factory photo

商品番号: WORK-EMRS11-2P-15-BLK-5.5-NR

WORK EMOTION RS11 15 Inch NORMAL – All Colours and Widths

$325.00 $392.86 保存 $67.86

配送料はチェックアウト時に計算されます

Width: 15×5.5J
Colour: Black (BLK)

The WORK EMOTION RS11 in 15 inch NORMAL, built to order in Japan. A genuine two-piece WORK wheel: choose the width and the disc colour here, then tell us the disk type and the exact inset you want from WORK's ranges below, and WORK machines the wheel to that spec.

Four-bolt fitment only — WORK builds every disk on this size and rim type in 4H-100(60) and nothing else. These wheels fit 4×100 hubs. They cannot be built for a five-bolt fitment — there is no 5H-100 or 5H-114.3 disc for this diameter and rim type. WORK prints no special P.C.D. option for this size either, so a five-bolt disc cannot be ordered as a custom P.C.D. If your car is five-bolt, please ask us about another size in this model.

WORK photographs Black, White at this exact size and rim type. Every photo on this page is WORK's own, of this diameter and rim type — none is borrowed from another size.

What this page covers

Model WORK EMOTION RS11
Construction 2-piece
Diameter 15 inch
Rim type NORMAL
Disc colours Black (BLK), White (WHT)
Widths 15×5.5J to 15×10.0J (10 widths)
Disk types O-Disk (DEEP RIM)
P.C.D. O-Disk: 4H-100(60)
Special P.C.D. WORK prints no special P.C.D. option for this size and rim type
Hub height clearance O-Disk: 29 mm with the FLAT TYPE cap, 37 mm with the HIGH TYPE cap
Load rating WORK prints no JWL rating for this size and rim type
Air valve V29A2
Rim finish Buff anodised (standard)
Centre cap Optional item — not included (see below)
WORK catalogue code RSE・QNB

What you choose on this page

  • Width and disc colour — in the variant picker above. WORK builds no concave variants of this model, so there is no concave choice to make.
  • Disk type and inset — tell us in the order notes, using the ranges below. Any inset inside a range can be built.
  • Quantity — the price shown is for one wheel.

Order inset ranges, 15 inch NORMAL

Width O-Disk — DEEP RIM
hub height clearance F 29 mm / H 37 mm · 4H-100(60)
Order inset
15×5.5J +43 to +20rim depth 42–65 mm
15×6.0J +49 to +35rim depth 42–56 mm
15×6.5J +55 to +29rim depth 42–68 mm
15×7.0J +62 to +22rim depth 42–82 mm
15×7.5J +68 to +16rim depth 42–94 mm
15×8.0J +74 to +10rim depth 42–106 mm
15×8.5J +81 to +4rim depth 42–119 mm
15×9.0J +85 to -3rim depth 44–132 mm
15×9.5J +85 to -9rim depth 50–144 mm
15×10.0J +85 to -16rim depth 57–158 mm

Centre caps — optional, not included

WORK supplies these wheels with one air valve and one disc sticker set per wheel. The centre cap is an optional item and is bought separately, one per wheel. WORK's own part numbers and list prices, tax included:

WORK part no. Centre cap WORK list price
No.120273 FLAT TYPE Black / Red ring ¥4,950 each
No.120179 FLAT TYPE Silver ¥3,850 each
No.120180 HIGH TYPE Silver ¥3,850 each
No.120186 FLAT TYPE Black ¥3,850 each
No.120187 HIGH TYPE Black ¥3,850 each
No.120219 FLAT TYPE Red ¥3,850 each
No.120220 HIGH TYPE Red ¥3,850 each
No.120250 FLAT TYPE Blue ¥3,850 each
No.120251 HIGH TYPE Blue ¥3,850 each
No.120235 FLAT TYPE W Black ¥3,850 each
No.120279 FLAT TYPE W Black / Navy ring ¥4,950 each
  • Black / Red ring, W Black and W Black / Navy ring are made in FLAT TYPE only.
  • The hub height clearance table above gives the F figure for the FLAT TYPE cap and the H figure for the HIGH TYPE cap. Those are reference values from the mounting face; on some hub shapes the cap can still touch even below the figure shown.
  • WORK notes that on some vehicles the centre cap cannot be fitted at all.
  • Ask us and we will add the caps you want to the order.

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one air valve (V29A2) and one disc sticker set. The centre cap is not included — it is an optional item, listed above.
  • A buff-anodised rim is the standard finish.
  • Below 45 mm of rim depth the disc sits proud of the rim flange. WORK adds that even above that depth the disc may still protrude very slightly past the rim flange, within tolerance.
  • WORK prints no JWL load rating for this size and rim type, so we state none. Ask us if you need a rating confirmed for registration.
  • WORK prints no special P.C.D. option and no special P.C.D. charge for this size and rim type. Only the P.C.D.s listed above can be built. WORK's spread for this model carries no 特殊 P.C.D. badge at all.
  • WORK asks that you check the nuts or bolts you intend to use with us before ordering.
  • TPMS is not offered on this size. WORK's TPMS badge on this spread reads 16/15inch 除く, which rules out 15 inch entirely.
  • The disc sticker set supplied depends on the disc colour WORK builds: a black disc comes with the White · Red / Gunmetal set, a white disc with the Black · Red / Gunmetal set.
  • WORK notes that some specifications take longer to produce, and that a build may not be possible under certain production conditions.
  • Optional black air valve, ¥550 per wheel on top of the listed price.

今すぐご利用いただけます!