The WORK CRAG T-GRABIC2 MC+ in 16 inch, built to order in Japan. A genuine one-piece WORK wheel — cast as a single unit, disc and rim together — on a NORMAL rim. WORK fixes the inset for each specification on a one-piece wheel: there is no rim depth to choose and no order-inset range, so what you pick here is the complete wheel.
Before you order
-
16×5.5J is two different wheels. WORK builds it in 5H-139.7 at +20 and ±0. Same price, same bolt pattern, different inset — and the inset is what decides where the wheel sits in the arch. Pick the one you want in the Configuration selector above; they are separate items and we order exactly what you choose.
-
This page carries more than one bolt pattern — 5H-139.7, 5H-114.3. The Configuration selector names the bolt pattern for the specification you are buying. Check it against your car before you order; a P.C.D. on its own does not confirm fitment.
-
No centre cap in 5H-139.7. WORK supplies no centre cap for that bolt pattern on this model, and the repair-parts cap (№120242) cannot be fitted to it either. WORK states this twice — in the included-items line and again on its own product page — so it is not an oversight. The other bolt patterns on this model do get a cap.
-
Wheel nuts are not part of the wheel price. See the accessories section below for exactly what WORK does and does not supply.
What this page covers
| Model |
WORK CRAG T-GRABIC2 MC+ |
| WORK model name |
CRAG T-GRABIC2 MC+The name exactly as WORK prints it. We prefix the manufacturer.
|
| Construction |
1-piece |
| Diameter |
16 inch |
| Rim type |
NORMAL |
| Colour |
Black Pierce Machining (BLKPM)WORK offers this model in one finish only.
|
| Sizes |
16×5.5J, 16×7.0J (2 widths) |
| P.C.D. |
5H-139.7(108.5) — at 16×5.5J, inset +20
5H-139.7(108.5) — at 16×5.5J, inset ±0
5H-114.3(73.3) — at 16×7.0J, inset +38 |
| Centre bore |
108.5 mm — 5H-139.7
73.3 mm — 5H-114.3 |
| Inset |
Fixed by WORK per specification — ±0, +20, +38. There is no order-inset range on this model.
|
| Hub height clearance |
42 mm — at 16×7.0J, 5H-114.3 · +38WORK prints no clearance figure in 5H-139.7 — that bolt pattern takes no centre cap on this model, so there is no cap clearance to state.
|
| Special P.C.D. |
Not offered. WORK prints no special P.C.D. column and no up-charge on this model, so only the bolt patterns above can be built. |
| Load rating |
Not stated for this diameter. WORK prints a JWL line for 6H-139.7 on this model, and 16 inch is not built in 6H-139.7. We do not extend a rating WORK did not print. Ask us if you need one confirmed for registration. |
| TPMS |
Not compatible. WORK marks TPMS support on the models that have it, on its own specification panel. WORK does not mark this model, so we do not fit or process TPMS sensors for it. |
| WORK catalogue code |
CGTG2K |
What you choose on this page
-
Size — the diameter and rim width.
-
Colour is fixed at Black Pierce Machining (BLKPM) — WORK offers no other finish on this model.
-
Configuration — the bolt pattern and the inset. On a one-piece wheel WORK fixes these together, so this is one choice, not two.
-
Quantity — the price shown is for one wheel.
WORK's specification table — 16 inch
This is WORK's own table for this diameter, reproduced as printed. Every row on it is a selectable item above.
The price for each of these is the one shown in the picker above, per wheel, in USD.
What comes with the wheel
Included — WORK's own included-items line, as printed:
- Centre cap — one per wheel, except in 5H-139.7, which WORK supplies with no centre cap.
- Air valve — one per wheel, WORK part V35K2.
Wheel nuts — we confirm before quoting. WORK's two sources disagree on this model: the catalogue's included-items line lists the centre cap and the air valve only, and refers you to the nut section of the catalogue separately, while the parts panel on WORK's own product page marks the WORK LOCK NUT SET as standard. We will not tell you nuts are included on the strength of a source that contradicts the price list. Ask us and we will put it to WORK and confirm in writing before you order.
Repair parts — WORK supplies these separately, by part number. Ask us and we will quote them with the wheels:
- №120242 — Centre cap (cannot be fitted to 5H-139.7).
- №180104 — Black air valve (V35K2).
Notes
- Price is per wheel. Built to order by WORK in Japan; allow for production time. WORK's own product page for this model carries no end-of-production notice, so it is in production.
- WORK lists no custom-order plans and no options for this model — its own specification panel records none for either. What is on this page is what WORK builds.
- WORK notes that some specifications take longer to produce, and that a build may not be possible under certain production conditions.
- Photographs are WORK's own. Screen colour is not a colour match — ask us if the exact finish matters.
