{"product_id":"fuel-surge-tank-install-kit-evo-x","title":"[Radium Engineering] コレクタータンク（フューエルサージタンク）インストールキット EVO X用","description":"\u003ch4\u003e■ 製品概要｜Product Overview\u003c\/h4\u003e\n\u003cp\u003e三菱ランサーエボリューションX (EVO X) に、Radium Engineering製コレクタータンク（フューエルサージタンク）を追加装着するための専用インストールキットです。あらゆる走行条件下での燃料飢餓（フューエルスターベーション）を防止する目的で設計されたシステムで、AN規格・純正(OEM)両対応のアダプターフィッティングと、マルチフューエル対応PTFEホースを採用しています。車両純正のマウントボスを利用して固定するため、ドリルによる穴あけ・切削加工は一切不要です。※コレクタータンク本体およびフューエルポンプは別売りです。\u003c\/p\u003e\n\u003ch4\u003e■ 特長｜Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAN規格・純正(OEM)両対応のアダプターフィッティングを採用\u003c\/li\u003e\n\u003cli\u003eアルマイト仕上げアルミニウム製・パウダーコート仕上げのマウントブラケットを採用\u003c\/li\u003e\n\u003cli\u003eマルチフューエル(E85\/エタノール対応)のPTFEホースを使用。3\/8インチ(6AN)、あらかじめ寸法カットされたプリアッセンブル仕様で、アルマイト仕上げアルミ製ホースエンド＋内部ステンレスブレード＋外側黒PVCカバーの構造。OEM燃料ラインとの互換性も確保\u003c\/li\u003e\n\u003cli\u003eステンレス製取付金具を採用\u003c\/li\u003e\n\u003cli\u003eリレー・ヒューズ内蔵の防水配線キットが付属し、Raychem製ハンダ不要ブッチスプライスにより、ハンダ付け不要・約30分で配線作業が完了\u003c\/li\u003e\n\u003cli\u003e車両純正のマウントボスを利用するため穴あけ・切削加工不要。純正バッテリーおよびウォッシャー液タンクをそのまま使用でき、トランクスペースを最大限確保\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e■ 配管仕様｜Plumbing\u003c\/h4\u003e\n\u003cp\u003e3\/8インチ(6AN)のプリアッセンブル・カット済みPTFEホースを使用。アルマイト仕上げアルミ製ホースエンドに内部ステンレスブレード、外側黒PVCカバーの構造で、耐薬品性・非透過性に優れています。\u003c\/p\u003e\n\u003ch4\u003e■ 取り付け｜Mounting\u003c\/h4\u003e\n\u003cp\u003eリアシート後方、トランク内のプラスチックパネル手前中央に設置します。車両純正のマウントボスにボルトオンで固定するため、ドリルでの穴あけやカット加工は不要。純正バッテリーおよびウォッシャー液タンクはそのまま使用可能で、トランクの使用スペースを最大限確保します。配線を含む取付作業の目安は約30分、ハンダ付け不要です。\u003c\/p\u003e\n\u003ch4\u003e■ 付属品｜Included Items\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eプリアッセンブル済み3\/8インチ(6AN) PTFEホース(カット済み)\u003c\/li\u003e\n\u003cli\u003eアルミニウム製マウントブラケット(パウダーコート仕上げ)\u003c\/li\u003e\n\u003cli\u003eAN規格・純正(OEM)両対応アダプターフィッティング\u003c\/li\u003e\n\u003cli\u003eステンレス製取付金具\u003c\/li\u003e\n\u003cli\u003eリレー・ヒューズ付き防水配線キット、Raychem製ハンダ不要ブッチスプライス\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e※コレクタータンク本体およびフューエルポンプは含まれません。別途ご用意ください。\u003c\/p\u003e\n\u003ch4\u003e■ 適合車種｜Vehicle Compatibility\u003c\/h4\u003e\n\u003cp\u003e三菱ランサーエボリューションX (EVO X)\u003c\/p\u003e\n\u003cp\u003e※メーカー(Radium Engineering)の案内では、純正ウォッシャー液タンクが本キットの取り付け位置に装着されている右ハンドル(RHD)車両には適合しないとされています。日本国内のEVO Xは右ハンドル仕様が多いため、ご購入前に必ずウォッシャー液タンクの搭載位置をご確認いただくか、当店までお問い合わせください。\u003c\/p\u003e\n\u003ch4\u003e■ ご注意｜Important Notes\u003c\/h4\u003e\n\u003cp\u003e本製品はインストールキット単体であり、コレクタータンク本体・フューエルポンプは含まれません。海外（米国）ブランド製品のため、取り付けには専門知識・工具が必要な場合があります。適合や仕様にご不安な点がございましたら、ご購入前にお問い合わせください。特に右ハンドル車両で純正ウォッシャー液タンクが取り付け位置にある場合は適合しない可能性があるため、事前確認をお願いいたします。\u003c\/p\u003e\n\u003ch4\u003e■ 品番一覧｜Part Numbers\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e品番\u003c\/th\u003e\n\u003cth\u003eタイプ\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e20-0113\u003c\/td\u003e\n\u003ctd\u003eコレクタータンク インストールキット \/ EVO X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch4\u003e■ Product Overview\u003c\/h4\u003e\n\u003cp\u003eThis is a dedicated installation kit for adding a Radium Engineering fuel surge tank (collector tank) system to the Mitsubishi Lancer Evolution X (EVO X). Designed to eliminate fuel starvation under all driving conditions, the kit uses AN and OEM-style adapter fittings along with multi-fuel compliant PTFE hose. It secures to OEM mounting bosses, so no drilling or cutting is necessary. Note: the surge tank itself and the fuel pump are sold separately.\u003c\/p\u003e\n\u003ch4\u003e■ Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAN and OEM adapter fittings for flexible plumbing options\u003c\/li\u003e\n\u003cli\u003ePowder-coated, anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eMulti-fuel (E85\/ethanol) compliant PTFE hose, 3\/8\" (6AN), preassembled and cut to length, with anodized aluminum hose ends over an inner stainless steel braid and black PVC cover, compatible with OEM fuel lines\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eWeatherproof wiring kit with relay and fuse, using Raychem solderless butt splices — no soldering required, roughly 30-minute wiring install\u003c\/li\u003e\n\u003cli\u003eMounts to OEM mounting bosses, so no drilling or cutting; retains the OEM battery and windshield washer fluid bottle while preserving full usable trunk space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e■ Plumbing\u003c\/h4\u003e\n\u003cp\u003eUses preassembled, precut 3\/8\" (6AN) PTFE hose with anodized aluminum hose ends, an inner stainless steel braid, and a black PVC outer cover for chemical resistance and non-permeability.\u003c\/p\u003e\n\u003ch4\u003e■ Mounting\u003c\/h4\u003e\n\u003cp\u003eInstalls behind the rear seat, centered in the trunk ahead of the plastic paneling. The kit secures to OEM mounting bosses, so no drilling or cutting is required. The OEM battery and windshield washer fluid bottle remain in place, preserving full usable trunk space. Total installation time including wiring is approximately 30 minutes, with no soldering required.\u003c\/p\u003e\n\u003ch4\u003e■ Included Items\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePreassembled 3\/8\" (6AN) PTFE hose, cut to length\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN and OEM style adapter fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eWeatherproof wiring kit with relay, fuse, and Raychem solderless butt splices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: the surge\/collector tank itself and the fuel pump are not included and must be purchased separately.\u003c\/p\u003e\n\u003ch4\u003e■ Vehicle Compatibility\u003c\/h4\u003e\n\u003cp\u003eMitsubishi Lancer Evolution X (EVO X)\u003c\/p\u003e\n\u003cp\u003ePer Radium Engineering's own product information, this kit does not fit right-hand-drive (RHD) models that have the OEM windshield washer reservoir located in the kit's mounting location. As most EVO X vehicles in Japan are RHD, please confirm your washer reservoir location before ordering, or contact us with questions.\u003c\/p\u003e\n\u003ch4\u003e■ Important Notes\u003c\/h4\u003e\n\u003cp\u003eThis is an installation kit only; the surge\/collector tank and fuel pump are not included. As an imported US-brand product, installation may require specialized knowledge and tools. Please contact us before purchase if you have any questions about fitment or specifications. RHD vehicles with the OEM washer reservoir in the mounting location may not be compatible — please confirm before ordering.\u003c\/p\u003e\n\u003ch4\u003e■ Part Numbers\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e20-0113\u003c\/td\u003e\n\u003ctd\u003eFuel Surge Tank Install Kit \/ EVO X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Radium Engineering","offers":[{"title":"コレクタータンク インストールキット \/ EVO X用","offer_id":47801475465353,"sku":"20-0113","price":369.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/5857\/5497\/files\/20-0113new_9374f96f-f23b-460c-b457-002400b4cbad.jpg?v=1783762740","url":"https:\/\/kurumaya-tokyo.co.jp\/ja\/products\/fuel-surge-tank-install-kit-evo-x","provider":"Kurumaya Tokyo JAPAN CO","version":"1.0","type":"link"}